From server at pcl.at Wed May 9 15:46:25 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:46:25 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 1] implement CMPX instruction in CPU
In-Reply-To:
Message-ID: <20070509134625.8D46758587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=1
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:50:20 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:50:20 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 2] update aux. carry for binary
arithmetic instructions
In-Reply-To:
Message-ID: <20070509135020.A61EB58587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=2
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:52:40 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:52:40 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 3] CPU - POPSR: interrupt mask bit ?
In-Reply-To:
Message-ID: <20070509135240.4F52258587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=3
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:52:55 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:52:55 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 4] sometimes it is necessary to reload
the FPGA
In-Reply-To:
Message-ID: <20070509135255.4DF9258587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=4
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:02 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:02 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 5] preserve last key press when tapping
RUN or STEP
In-Reply-To:
Message-ID: <20070509135303.11E9958587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=5
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:11 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:11 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 6] false opcodes should lead to
interrupt or restart
In-Reply-To:
Message-ID: <20070509135311.D735258587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=6
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:18 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:18 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 7] add a time base
In-Reply-To:
Message-ID: <20070509135318.D680458587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=7
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:26 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:26 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 8] When erasing the flash,
also disable the user program auto start
In-Reply-To:
Message-ID: <20070509135326.B4BBB58587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=8
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:33 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:33 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 9] add breakpoint(s)
In-Reply-To:
Message-ID: <20070509135333.DEA4958587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=9
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:40 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:40 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 10] make debug more interactive
In-Reply-To:
Message-ID: <20070509135340.65A8A58587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=10
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:47 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:47 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 11] make hardware handshake in UART
communication work
In-Reply-To:
Message-ID: <20070509135347.7D36C58587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=11
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:53:54 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:53:54 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 12] When tapping STEP button too fast
in sequence the ROM monitor crashes
In-Reply-To:
Message-ID: <20070509135354.E5E0958587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=12
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:03 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:03 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 13] Restoring the user program from
flash at boot time destroys stack and reboots
In-Reply-To:
Message-ID: <20070509135403.7B42B58587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=13
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:09 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:09 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 14] STEP should not restart the user
program
In-Reply-To:
Message-ID: <20070509135409.EA01258587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=14
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:16 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:16 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 15] RUN button does not work under
certain conditions
In-Reply-To:
Message-ID: <20070509135416.6DE5858587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=15
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:22 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:22 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 16] Make FPGA compilation work with
Precision compiler
In-Reply-To:
Message-ID: <20070509135423.155A458587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=16
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:30 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:30 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 17] move mouse before buttons work (GTK
error)
In-Reply-To:
Message-ID: <20070509135430.4A8C758587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=17
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:37 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:37 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 18] add a start address parameter to
"run" command
In-Reply-To:
Message-ID: <20070509135437.ACF6958587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=18
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:45 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:45 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 19] Memory display command ("md")
should display next 0x100 bytes when pressing Enter again
In-Reply-To:
Message-ID: <20070509135445.3A82958587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=19
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:54:53 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:54:53 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 20] create an overall installation
package
In-Reply-To:
Message-ID: <20070509135453.7D01858588@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=20
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:55:02 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:55:02 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 21] ispVMSystem does not work in Linux
In-Reply-To:
Message-ID: <20070509135502.CCDB158587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=21
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 15:55:11 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 15:55:11 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 22] Keypad is very insensitive when not
connected to PC
In-Reply-To:
Message-ID: <20070509135511.8179558587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=22
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
QAContact| |diycalculator_hw_bug at printed
| |.inbus.at
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 18:23:35 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 18:23:35 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 24] New: change navigation bar in DIY
Calculator Wiki:
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=24
Summary: change navigation bar in DIY Calculator Wiki:
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: normal
Priority: P3
Component: Documentation
AssignedTo: helmut.zulus at pcl.at
ReportedBy: helmut.zulus at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
change navigation bar in DIY Calculator Wiki to handle all the newly installed
VCS: and Wiki: crosslinking stuff
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Wed May 9 19:16:58 2007
From: server at pcl.at (server at pcl.at)
Date: Wed, 9 May 2007 19:16:58 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 24] change navigation bar in DIY
Calculator Wiki
In-Reply-To:
Message-ID: <20070509171658.9D29958577@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=24
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 16:59:44 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 16:59:44 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 25] New: add new opcodes to single step
code
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=25
Summary: add new opcodes to single step code
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: normal
Priority: P3
Component: ROM Monitor
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
The new opcodes (BCD instructions, PUSHX, POPX, CMPX) have to added to the
single step code. Otherwise an "Invalid opcode detected" error message will be
generated when hitting one of these instructions in single step debug.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 16:59:50 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 16:59:50 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 25] add new opcodes to single step code
In-Reply-To:
Message-ID: <20070511145950.A854B5858A@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=25
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 17:46:38 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 17:46:38 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 26] New: LCD backlight has inverse logic
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=26
Summary: LCD backlight has inverse logic
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: normal
Priority: P3
Component: FPGA VHDL
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
The LCD backlight, which is bit6 of the USER LEDs port, should have positive
logic; i.e. when writing '1' it should be on, when writing '0' it should be
off. At the same time it should be on right after reset with no CPU
interaction.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 17:46:42 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 17:46:42 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 26] LCD backlight has inverse logic
In-Reply-To:
Message-ID: <20070511154642.A8CAD5858A@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=26
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 23:17:06 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 23:17:06 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 27] New: Support "break" command
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=27
Summary: Support "break" command
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: normal
Priority: P3
Component: Loader
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
In ROM monitor starting with version V0.C exists the possibility of setting a
breakpoint for debugging a user program. The GUI Loader should support
setting/clearing the breakpoint, too.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 23:17:11 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 23:17:11 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 27] Support "break" command
In-Reply-To:
Message-ID: <20070511211712.0B09B58586@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=27
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 23:20:50 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 23:20:50 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 28] New: add CTRL - * hotkeys
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=28
Summary: add CTRL - * hotkeys
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: minor
Priority: P4
Component: Loader
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
Inside the terminal there exist several "hotkeys":
CTRL-A: single step
CTRL-B: run
CTRL-C: (soft) reset
etc.
The same hotkeys should available from within the GUI Loader.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From server at pcl.at Fri May 11 23:20:56 2007
From: server at pcl.at (server at pcl.at)
Date: Fri, 11 May 2007 23:20:56 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 28] add CTRL - * hotkeys
In-Reply-To:
Message-ID: <20070511212056.A1DE258586@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=28
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Mon May 14 19:27:29 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Mon, 14 May 2007 19:27:29 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 24] change navigation bar in DIY
Calculator Wiki Main_Page
In-Reply-To:
Message-ID: <20070514172729.3F5B15858B@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=24
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Tue May 15 08:52:17 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Tue, 15 May 2007 08:52:17 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 26] LCD backlight has inverse logic
In-Reply-To:
Message-ID: <20070515065217.A23845858A@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=26
------- Comment #1 from helmut.zulus at pcl.at 2007-05-15 08:52 UTC -------
as it turned out, the way it was initially, is more intuitive - means this
"fix" should not be applied
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Tue May 15 09:31:01 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Tue, 15 May 2007 09:31:01 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 26] LCD backlight has inverse logic
In-Reply-To:
Message-ID: <20070515073101.9CC945858A@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=26
------- Comment #2 from helmut.zulus at pcl.at 2007-05-15 09:31 UTC -------
(In reply to comment #1)
> as it turned out, the way it was initially, is more intuitive - means this
> "fix" should not be applied
>
to find in VCS: diy-calculator?view=rev&revision=123
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 12:28:19 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 12:28:19 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 26] LCD backlight has inverse logic
In-Reply-To:
Message-ID: <20070516102819.61E8358587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=26
------- Comment #3 from server at pcl.at 2007-05-16 12:28 UTC -------
Subject: r174 - /fpga-vhdl/trunk/diy_calculator.vhd
Author: jh
Date: Wed May 16 12:28:16 2007
New Revision: 174
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=174
Log:
Do not invert LCD backlight for CPU write access BugID: 26
Modified:
fpga-vhdl/trunk/diy_calculator.vhd
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 12:32:46 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 12:32:46 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 26] LCD backlight has inverse logic
In-Reply-To:
Message-ID: <20070516103246.627395858A@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=26
------- Comment #4 from server at pcl.at 2007-05-16 12:32 UTC -------
Subject: r176 - /rom-monitor/trunk/diy_calc.asm
Author: jh
Date: Wed May 16 12:32:44 2007
New Revision: 176
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=176
Log:
breakpoint: pressing RUN executes program from BP to BP
do not invert LCD backlight for CPU write access BugID: 26
Modified:
rom-monitor/trunk/diy_calc.asm
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 15:28:14 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 15:28:14 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 13] Restoring the user program from
flash at boot time destroys stack and reboots
In-Reply-To:
Message-ID: <20070516132814.7C97358587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=13
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |WORKSFORME
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 15:32:22 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 15:32:22 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 13] Restoring the user program from
flash at boot time destroys stack and reboots
In-Reply-To:
Message-ID: <20070516133223.1CC9A58587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=13
------- Comment #2 from johannes.hausensteiner at pcl.at 2007-05-16 15:32 UTC -------
This did not show up anymore. So I set it to "WORKSFORME".
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:00:06 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:00:06 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 9] add breakpoint(s)
In-Reply-To:
Message-ID: <20070516140007.6268B5858A@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=9
------- Comment #1 from server at pcl.at 2007-05-16 16:00 UTC -------
Subject: r177 - /rom-monitor/trunk/diy_calc.asm
Author: jh
Date: Wed May 16 16:00:02 2007
New Revision: 177
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=177
Log:
add breakpoint enable/disable BugID: 9
add memory dump via CTRL K BugID: 10
disable user program autostart at flash erase command BugID :8
add address parameter to 'run' command BugID: 18
add 'mdx' cmd = 'md' cmd with address auto-increment BugID: 19
add opcodes of new instructions to single step code BugID: 25
Version 0.C
Modified:
rom-monitor/trunk/diy_calc.asm
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:02:20 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:02:20 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 8] When erasing the flash,
also disable the user program auto start
In-Reply-To:
Message-ID: <20070516140220.508BA58583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=8
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
------- Comment #1 from johannes.hausensteiner at pcl.at 2007-05-16 16:02 UTC -------
Solved in ROM monitor version 0.C
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:09:01 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:09:01 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 9] add breakpoint(s)
In-Reply-To:
Message-ID: <20070516140901.BE23E58583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=9
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
------- Comment #2 from johannes.hausensteiner at pcl.at 2007-05-16 16:09 UTC -------
Breakpoints added in ROM monitor version 0.C
A new 'break' command was added:
break .......... displays the status of the breakpoint (enabled/disabled)
together with the address of the breakpoint
break address .. sets the breakpoint to address and enables it
break clr ...... clears the breakpoint
break en ....... enables the breakpoint
break dis ...... disables the breakpoint
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:16:32 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:16:32 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 10] make debug more interactive
In-Reply-To:
Message-ID: <20070516141632.D91D558583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=10
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
------- Comment #1 from johannes.hausensteiner at pcl.at 2007-05-16 16:16 UTC -------
Solved in ROM monitor version 0.C
When sending a CTRL K character to the DIY Calculator it responds with a memory
dump using the last start and no. of bytes setting. This happens from within
the interrupt handler, so that it is possible to invoke this memory dump during
a
debug session when in halted in step mode.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:17:53 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:17:53 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 18] add a start address parameter to
"run" command
In-Reply-To:
Message-ID: <20070516141753.F07AC58583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=18
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
------- Comment #1 from johannes.hausensteiner at pcl.at 2007-05-16 16:17 UTC -------
added in ROM monitor version 0.C
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:21:47 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:21:47 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 19] Memory display command ("md")
should display next 0x100 bytes when pressing Enter again
In-Reply-To:
Message-ID: <20070516142147.C8FAC58583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=19
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
------- Comment #1 from johannes.hausensteiner at pcl.at 2007-05-16 16:21 UTC -------
added in ROM monitor Version 0.C
A new command 'mdx' was added. It has the same syntax and behaves exactly as
the standard 'md' command except that the address range is automatically
incremented. A next 'md' or 'mdx' command will display the next following
memory region.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:22:26 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:22:26 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 25] add new opcodes to single step code
In-Reply-To:
Message-ID: <20070516142226.EA9D058583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=25
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
------- Comment #1 from johannes.hausensteiner at pcl.at 2007-05-16 16:22 UTC -------
Solved in ROM monitor version 0.C
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:25:03 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:25:03 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 27] New: add support for breakpoint
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=27
Summary: add support for breakpoint
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: enhancement
Priority: P2
Component: Loader
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
BugsThisDependsOn: 9
Add support for breakpoint(s) in GUI Loader.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:25:04 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:25:04 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 9] add breakpoint(s)
In-Reply-To:
Message-ID: <20070516142504.5835E58583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=9
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
OtherBugsDependingO| |27
nThis| |
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:26:42 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:26:42 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 28] New: add support for memory dump
during debug
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=28
Summary: add support for memory dump during debug
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: enhancement
Priority: P2
Component: Loader
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
BugsThisDependsOn: 10
Add support for updating the memory dump display during a debug session.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:26:42 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:26:42 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 10] make debug more interactive
In-Reply-To:
Message-ID: <20070516142642.C496458583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=10
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
OtherBugsDependingO| |28
nThis| |
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 16:27:53 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 16:27:53 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 26] LCD backlight has inverse logic
In-Reply-To:
Message-ID: <20070516142753.9408A58583@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=26
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |WONTFIX
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 18:24:26 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 18:24:26 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 9] add breakpoint(s)
In-Reply-To:
Message-ID: <20070516162426.595DE5858F@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=9
------- Comment #3 from server at pcl.at 2007-05-16 18:24 UTC -------
Subject: r179 - /loader/trunk/main.c
Author: jh
Date: Wed May 16 18:24:24 2007
New Revision: 179
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=179
Log:
support breakpoint BugID: 9, BugID: 27
support interactive debug BugID: 10, BugID: 28
Modified:
loader/trunk/main.c
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 18:25:38 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 18:25:38 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 10] make debug more interactive
In-Reply-To:
Message-ID: <20070516162538.E51A85858F@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=10
------- Comment #2 from server at pcl.at 2007-05-16 18:25 UTC -------
Subject: r180 - /loader/trunk/disp_mem.c
Author: jh
Date: Wed May 16 18:25:37 2007
New Revision: 180
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=180
Log:
support interactive debug BugID: 10, BugID: 28
add new instructions for disassembler view
Modified:
loader/trunk/disp_mem.c
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 18:26:13 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 18:26:13 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 9] add breakpoint(s)
In-Reply-To:
Message-ID: <20070516162613.446D45858F@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=9
------- Comment #4 from server at pcl.at 2007-05-16 18:26 UTC -------
Subject: r181 - /loader/trunk/diy_load.h
Author: jh
Date: Wed May 16 18:26:11 2007
New Revision: 181
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=181
Log:
support breakpoint BugID: 9, BugID: 27
support interactive debug BugID: 10, BugID: 28
Modified:
loader/trunk/diy_load.h
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 18:26:46 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 18:26:46 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 9] add breakpoint(s)
In-Reply-To:
Message-ID: <20070516162646.BC0DD5858F@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=9
------- Comment #5 from server at pcl.at 2007-05-16 18:26 UTC -------
Subject: r182 - in /loader/trunk: breakpoint.c breakpoint.h
Author: jh
Date: Wed May 16 18:26:45 2007
New Revision: 182
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=182
Log:
support breakpoint BugID: 9, BugID: 27
Added:
loader/trunk/breakpoint.c
loader/trunk/breakpoint.h
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 22:43:19 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 22:43:19 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 29] New: dmx command crashes rom-monitor
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=29
Summary: dmx command crashes rom-monitor
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: normal
Priority: P3
Component: ROM Monitor
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: helmut.zulus at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
Version VCS: 178
dmx command crashes rom-monitor when $FFFF is reached.
displays perfect the "last" page from $FF00 till $FFFF - next time pressing
"Enter" causes the rom-monitor to dump contents of memory from $0000 endlessly.
Reset is the only option to stop it.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 22:48:30 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 22:48:30 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 29] dmx command crashes rom-monitor
In-Reply-To:
Message-ID: <20070516204830.D3B5458587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=29
------- Comment #1 from helmut.zulus at pcl.at 2007-05-16 22:48 UTC -------
Version VCS: diy-calculator?view=rev&revision=178
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Wed May 16 22:55:08 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Wed, 16 May 2007 22:55:08 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 29] dmx command crashes rom-monitor
In-Reply-To:
Message-ID: <20070516205508.F38E458587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=29
------- Comment #2 from helmut.zulus at pcl.at 2007-05-16 22:55 UTC -------
(In reply to comment #0)
> Version VCS: diy-calculator?view=rev&revision=178
> dmx command crashes rom-monitor when $FFFF is reached.
> displays perfect the "last" page from $FF00 till $FFFF - next time pressing
> "Enter" causes the rom-monitor to dump contents of memory from $0000 endlessly.
> Reset is the only option to stop it.
>
typo - its not "dmx" command but "mdx"...
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 18 09:31:07 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 18 May 2007 09:31:07 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 30] New: single stepping an RTS
instruction crashes
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=30
Summary: single stepping an RTS instruction crashes
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: major
Priority: P2
Component: ROM Monitor
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
During single step the RTS instruction gets a wrong target address. This was
introduced when implementing the breakpoint functionality.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 18 09:32:57 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 18 May 2007 09:32:57 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 30] single stepping an RTS instruction
crashes
In-Reply-To:
Message-ID: <20070518073257.8565C5858F@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=30
------- Comment #1 from server at pcl.at 2007-05-18 09:32 UTC -------
Subject: r183 - /rom-monitor/trunk/diy_calc.asm
Author: jh
Date: Fri May 18 09:32:54 2007
New Revision: 183
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=183
Log:
solve RTS during single step BugID: 30
Modified:
rom-monitor/trunk/diy_calc.asm
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 18 09:35:35 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 18 May 2007 09:35:35 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 30] single stepping an RTS instruction
crashes
In-Reply-To:
Message-ID: <20070518073535.3666D58587@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=30
johannes.hausensteiner at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
------- Comment #2 from johannes.hausensteiner at pcl.at 2007-05-18 09:35 UTC -------
Due to making the GET_ADDR as a subroutine the stack was shifted and the RTS
target address was assigned the return address of the GET_ADDR call. See
TST_CF: label in diy_calc.asm .
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 18 10:53:42 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 18 May 2007 10:53:42 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 31] New: ignore received characters
during step mode
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=31
Summary: ignore received characters during step mode
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: normal
Priority: P2
Component: ROM Monitor
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: johannes.hausensteiner at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
When in single step debug mode characters from the RS-232 are received. Because
they are not handled properly, further rx-interrupts are blocked. This leads to
a situation where the GUI Loader cannot control the DIY Calculator anymore.
Thus any characters except for control characters should be ignored during step
mode.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Tue May 22 07:53:59 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Tue, 22 May 2007 07:53:59 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 32] New: SPI Module fails to write
flash on some prototypes
Message-ID:
http://svn.pcl.at/bugzilla/show_bug.cgi?id=32
Summary: SPI Module fails to write flash on some prototypes
Product: DIY Calculator Hardware Project
Version: 1.0
Platform: All
OS/Version: All
Status: NEW
Severity: critical
Priority: P3
Component: FPGA VHDL
AssignedTo: johannes.hausensteiner at pcl.at
ReportedBy: helmut.zulus at pcl.at
QAContact: diycalculator_hw_bug at printed.inbus.at
Obviuosly there are race conditions in the SPI module. The same .bit file works
on one prototype but fails on an other to write the flashram.
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 25 11:20:48 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 25 May 2007 11:20:48 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 32] SPI Module fails to write flash on
some prototypes
In-Reply-To:
Message-ID: <20070525092049.120505858F@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=32
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
AssignedTo|johannes.hausensteiner at pcl.a|helmut.zulus at pcl.at
|t |
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 25 11:21:04 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 25 May 2007 11:21:04 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 32] SPI Module fails to write flash on
some prototypes
In-Reply-To:
Message-ID: <20070525092104.A42EC58589@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=32
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 25 11:32:35 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 25 May 2007 11:32:35 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 32] SPI Module fails to write flash on
some prototypes
In-Reply-To:
Message-ID: <20070525093235.99BCF58589@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=32
------- Comment #1 from helmut.zulus at pcl.at 2007-05-25 11:32 UTC -------
Inspecting the SPI module did not show any race conditions.
It turned out that this bug is related to poor setting of timing closure in the
"PLACE and ROUTE" constraints.
...working on better assigning of CLK domains and finetuning PAR constraints
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 25 11:40:19 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 25 May 2007 11:40:19 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 1] implement CMPX instruction in CPU
In-Reply-To:
Message-ID: <20070525094019.B6E555858F@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=1
------- Comment #1 from server at pcl.at 2007-05-25 11:40 UTC -------
Subject: r199 - /fpga-vhdl/trunk/cpu.vhd
Author: hzulu
Date: Fri May 25 11:40:17 2007
New Revision: 199
URL: http://svn.pcl.at/viewvc/diy-calculator?view=rev&rev=199
Log:
solve error carry at ADD/ADDC/SUB/SUBC
add CMPX instruction BugID: 1
update auxillary carry flag at ADD,ADDC,SUB,SUBC - Bug ID: 2
Modified:
fpga-vhdl/trunk/cpu.vhd
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 25 12:02:36 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 25 May 2007 12:02:36 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 32] SPI Module fails to write flash on
some prototypes
In-Reply-To:
Message-ID: <20070525100236.73E8E58589@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=32
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
------- Comment #2 from helmut.zulus at pcl.at 2007-05-25 12:02 UTC -------
after splitting CLK domains and fine tuning constraints, timing report shows
now about 55MHz maximum CLK frequency - far better then the targeted 25MHz :)
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 25 12:05:42 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 25 May 2007 12:05:42 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 1] implement CMPX instruction in CPU
In-Reply-To:
Message-ID: <20070525100543.02E7858589@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=1
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
From PCL_bugzilla-daemon at printed.inbus.at Fri May 25 12:09:39 2007
From: PCL_bugzilla-daemon at printed.inbus.at (PCL_bugzilla-daemon at printed.inbus.at)
Date: Fri, 25 May 2007 12:09:39 +0200 (CEST)
Subject: [diycalculator_hw_bug] [Bug 2] update aux. carry for binary
arithmetic instructions
In-Reply-To:
Message-ID: <20070525100939.A539258589@printed.inbus.at>
http://svn.pcl.at/bugzilla/show_bug.cgi?id=2
helmut.zulus at pcl.at changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
--
Configure bugmail: http://svn.pcl.at/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.